Create an account and get 500 points ($5 value).
Shopping Cart0 items

No products in the cart.

← Back to the journal

Buying Guides

Wash a Dakimakura Cover Inside Out: A Practical Guide

Should you wash a dakimakura cover inside out? For machine washing that the product’s care instructions permit, Dakimakura Store recommends turning the empty cover inside out and placing it in a laundry bag. The important word is empty: remove the inner pillow first, then prepare the fabric shell without pulling against the filling or forcing the zipper.

This guide explains that turning step, including how to handle a long cover, what to do when the closure is awkward to reach, and when to turn the cover back for use. It is one part of a gentle washing routine. Reversing the fabric does not make an unsuitable wash cycle, detergent or load safe for your particular cover.

Inside out means the fabric reverse faces outward

A double-sided character cover can be confusing because both outer panels may have artwork. Turning it inside out does not mean choosing the other illustrated side. It means bringing the inside surface of the empty fabric shell to the outside, so the printed surfaces face inward.

Look at the open end before starting. You should be able to distinguish the exterior artwork from the interior surface and seams. You do not need to unpick a seam, separate the two printed panels or remove a zipper to reverse an ordinary cover. Use its existing opening and keep the whole cover supported while working.

The store’s washing instructions for covers specify inside-out preparation for permitted machine washing. They also call for a delicate cold-water cycle, mild detergent and a laundry bag. Read those instructions alongside the care information supplied with your own product before deciding how to clean it.

Check the cover before reversing it

Work on a clean, dry surface with enough room for the full length of the pillow. Open the closure gently and remove the insert without dragging the cover by one corner. Set the inner pillow aside where it will stay dry. Its filling needs its own care instructions and should not remain inside the cover for this process.

Inspect the outside while it is still easy to see. Note any marks that need attention, and look for open seams, loose threads or fabric caught near the zipper. Turning a damaged cover inside out will not resolve the damage. Stop if normal handling starts widening a seam or requires a hard pull.

  • Confirm the selected fabric from the order record or product label.
  • Check whether machine washing is permitted for that specific cover.
  • Remove the insert and any separately attached accessories.
  • Inspect the printed surface, seams and closure before turning.
  • Prepare a clean place to support the empty cover.

Turn a long, empty cover in small sections

Gather the fabric toward the opening

With the zipper open, bring the empty length closer to you by gathering the fabric gently along the supporting surface. Avoid reaching for the far end and pulling the entire cover taut. The aim is to make the long shell manageable, with slack around the opening rather than tension at its corners.

Bring the closed end through

Reach through the opening and take hold of the fabric near the closed end. Guide that end back through the opening, feeding the surrounding fabric along with your other hand. Work gradually. If the cover bunches up, pause and loosen the bundle instead of trying to pull everything through at once.

Let the reversed section rest on the surface as you continue. A large cover does not need to hang from its zipper end while you work. Keep rings, sharp nails and nearby fasteners away from the fabric, and use broad, gentle handling rather than pinching a small area and stretching it.

Check the result without stretching the corners

Once the shell is reversed, separate any folds enough to see that the full length has turned. The printed panels should now face inward. Ease the end corners into place with your fingers; do not use a pen, scissors or another pointed object to push them out. The cover only needs to be loosely arranged for washing.

Handle the zipper without forcing access

The store’s general preparation advice says to close the zipper before washing. Check how your own closure can be reached after the cover is reversed. Zipper construction varies, and the fact that a cover has two illustrated sides does not establish that its slider can be operated equally from either surface.

If you can close it gently, keep the surrounding fabric clear as the slider moves. If you cannot reach or operate it without strain, stop. Do not cut an access hole, attach a makeshift pull through the fabric or force the slider with pliers. Ask the store how to prepare that particular closure, giving the product code and a clear photograph of the issue.

A stuck zipper is a separate problem from turning the cover. Resolve the obstruction or obtain product-specific guidance before starting a wash that might make the fabric harder to handle. The correct preparation should not require damaging an otherwise usable cover.

Keep the laundry bag and wash method as separate checks

An inside-out cover still needs room in its laundry bag. Put it in loosely rather than twisting it into a tight rope or compressing it into the smallest bag available. The guide to choosing and packing a laundry bag explains that separate preparation step.

Follow the permitted wash method after the turning step. Do not add rough items, hooks or exposed fasteners just because the artwork faces inward. Likewise, inside-out preparation does not replace mild detergent, gentle handling or the instruction to avoid tumble drying. Each part of the routine addresses a different handling decision.

If you hand wash instead, follow the product’s instructions for that method. The store’s hand-washing guidance emphasizes gentle movement, thorough rinsing and pressing out water without twisting. It does not make reversing the cover a reason to scrub the inner surface or wring the shell.

Match the advice to the fabric you actually ordered

The DMMD Clear cover, product code MGF-12073, offers several fabric choices on one listing. Its character name alone therefore does not identify the material in your order. Check your selected option before carrying a care routine over from a different cover.

The Roy Mustang cover, product code D24546, also lists Peach Skin, Natural Velvet, Smooth Knit, Two Way Tricot and Upgraded Two Way Tricot. Both examples are cover-only products with separately selected size and material options; neither product image tells you which option a previous buyer chose.

Two illustrated panels of the Roy Mustang D24546 dakimakura cover with blue clothing, flowers and ribbons
Two illustrated panels show the cover’s outer artwork, not its inside-out washing orientation.

The cover fabric comparison guide can help identify those option names. Product-specific care guidance still determines the cleaning method. For example, the store recommends hand washing Natural Velvet; turning it inside out should not be treated as permission to switch to machine washing.

After washing, support the fabric and let it dry

Take the cover out of the bag with its weight supported. Press water out gently and use a clean towel to absorb excess moisture, following the store’s care guidance. Avoid twisting the length or pulling on the ends to make it straight. Air dry away from direct sunlight and high humidity.

The turning step is not a drying-time promise. Check that the fabric, seams and folds are fully dry before putting the cover back on its insert or into storage. Turn it right side out gently when preparing it for use, check the artwork’s orientation, and fit it to the matching insert without forcing the closure.

Frequently asked questions

Is flipping to the other character image the same as inside out?

No. Both character images may be exterior panels. Inside out means the interior fabric surface faces outward and the artwork faces inward.

Do I leave the inner pillow in while turning the cover?

No. Remove it first. These preparation steps apply to the empty cover, while the insert and its filling need separate care.

Can I machine wash any fabric once it is inside out?

No. Use a machine only when the specific care instructions permit it. Reversing the cover does not change the permitted cleaning method.

What if I cannot close the zipper after turning it?

Do not force it or alter the cover. Check the closure’s instructions or ask the store for guidance using the product code and a photo.

When choosing your next design from the dakimakura cover collection, save its fabric selection and care information with your order details. Knowing the exact configuration makes the next wash easier to prepare, from removing the insert to turning the empty cover gently.

Made for collectors, by DakimakuraStore.Explore more guides →