Create an account and get 500 points ($5 value).
Shopping Cart0 items

No products in the cart.

← Back to the journal

Buying Guides

3D Dakimakura Accessories: Fit Checklist Before You Buy

Buying a 3D dakimakura accessory is easier when you treat it as one part of a system, not as a universal upgrade. The cover, the accessory, any fuzz cover, and the inner pillow can each have their own size or construction choices. A label that looks familiar is not enough on its own.

This 3D dakimakura accessory compatibility checklist helps you compare the parts in the right order. It is designed for shoppers deciding between the store’s 3D Breast accessory, a separate fuzz pillow cover, and cover listings that show optional 3D selectors. It does not assume that one component automatically fits every other product.

Start by naming the parts you already own

Before opening a product page, make a small inventory: character cover, inner pillow, 3D accessory, and any fuzz cover. Write down the product code and the two dimensions for anything already in your setup. If you do not yet own anything, decide whether you are building a new system or adding to a particular cover.

The store’s 3D Breast & Hip collection is a useful place to see that these are separate product types. A character cover is not the same item as an insert or an accessory. Keeping those roles separate at the start makes every later choice less confusing.

Use four labels, not one vague size note

  • Cover size: the length and width selected for the character pillow cover.
  • Inner-pillow size: the dimensions of the insert that gives the cover its main shape.
  • Accessory option: the specific 3D selector shown on the relevant product page.
  • Fuzz-cover size: the size selected for the accessory cover, when one is needed separately.

Those labels may look repetitive, but they prevent the most common mistake: treating a choice for one layer as confirmation for every layer. A correct cover size does not, by itself, confirm an accessory configuration.

Read the 3D accessory listing as a configuration

The 3D Breast accessory listing separates its size choices from its Cover Size choices. The page lists A through F cup options, while the cover-size menu includes 100 × 34 cm, 120 × 40 cm, 150 × 50 cm, 160 × 50 cm, 180 × 60 cm, and a “No Fuzz Cover” selection. That is a signal to slow down: these fields describe different decisions.

Do not choose a cup option first and assume the remaining parts will sort themselves out. Instead, identify the cover you intend to use, confirm its dimensions, and then review the accessory’s own choices. The listing identifies the 3D item as an accessory; a character pillowcase and a standard inner pillow are separate items.

3D dakimakura accessory product image
Check the accessory option and cover-size field separately on the product page.

Decide whether you need a separate fuzz cover

A fuzz cover is its own item when the configuration calls for it. The 3D Breast & Hip Fuzz Pillow Cover lists 150 × 50 cm, 160 × 50 cm, and 180 × 60 cm options. Compare that menu with the rest of your setup rather than picking a size based on a similar-looking product name.

Its product image and listing make it a helpful reminder that a cover for an accessory is not a replacement character cover. If you are unsure whether a fuzz cover is included in the configuration you selected, pause before checkout and read the selected options again. The “No Fuzz Cover” choice on the accessory page is especially important to notice; it means you should not assume a separate cover is included.

Use a compatible character-cover page as a final cross-check

Some character-cover pages present optional 3D selectors. For example, the Riza Hawkeye cover and the Roronoa Zoro cover both show size and material menus plus optional 3D Breast and 3D Buttocks fields. Their option labels state that a 3D fuzz cover is not included with those selectors.

That does not make either cover a promise that every separate accessory is interchangeable. It gives you a practical page to inspect before buying: look at the exact cover size, read the optional-field wording, and compare it with the accessory and fuzz-cover listings. Product menus, rather than a remembered blog post or screenshot, are the best source for the final choice.

Keep the base pillow decision independent

A standard body-pillow insert is still its own purchase decision. The inner pillow listing offers 100 × 34 cm, 120 × 40 cm, 150 × 50 cm, 160 × 50 cm, 170 × 60 cm, and 180 × 60 cm options, with polypropylene cotton or down cotton choices. Match length and width to the cover you have selected, and then confirm whether the construction of your chosen 3D setup calls for anything more specific.

In other words, use a standard insert where the selected cover and setup support it; do not buy one as a substitute for checking a shaped or accessory-specific configuration. For an overview of how the components relate, the store’s earlier 3D dakimakura setup checklist is a useful companion.

A fit-first buying sequence

Step What to confirm Why it matters
1. Cover Exact product code and selected length × width Gives the rest of the setup a clear starting point.
2. Base insert Whether a standard inner pillow is appropriate, plus its dimensions Cover and insert should match in both dimensions.
3. 3D accessory The accessory option and its separate cover-size field These are different controls, not duplicate wording.
4. Fuzz cover Whether it is included and, if separate, its listed size A separate cover must be chosen deliberately.
5. Cart Every selected field, quantity, and price Confirms the cart reflects the configuration you reviewed.

If any one of these steps is unclear, do not solve it by selecting the closest-looking option. Save the product codes and ask the store for clarification about compatibility. That is a better use of time than assembling components on an assumption.

Common buying mistakes to avoid

  • Assuming an accessory includes a character cover. The 3D Breast listing identifies the character pillowcase separately.
  • Assuming a fuzz cover is automatically included. Read the selected cover-size option and the product description.
  • Matching by one dimension only. Keep both length and width in your comparison notes.
  • Using an old configuration as evidence. Reopen the live product page and review its current option labels before ordering.
  • Choosing a cover only by artwork. The artwork can be the favorite, but its size and optional fields still need to work with the planned components.

Frequently asked questions

Does the 3D Breast accessory include a character dakimakura cover?

No. Its listing identifies the 3D item as an accessory and states that a character pillowcase and inner pillow are separate.

Is a fuzz cover always included with a 3D accessory?

Do not assume so. The 3D Breast page has a “No Fuzz Cover” option, and the separate 3D Breast & Hip Fuzz Pillow Cover is sold with its own size menu.

Can I match a 160 × 50 cm character cover with any 160 × 50 cm accessory setup?

Not automatically. Dimensions are a necessary check, but you should also read the construction and option labels on the exact product pages.

Do standard inner pillows come with a character cover?

No. The inner-pillow page describes the insert as a separate item; a character cover is chosen separately.

What should I keep when comparing several configurations?

Keep the product code, selected dimensions, accessory option, fuzz-cover decision, and cart total for each candidate. This makes it much easier to spot a mismatch before ordering.

Ready to build a 3D dakimakura setup? Start with the cover you actually want, map each component by its own option labels, and only then add the combination that matches your selected configuration.

Made for collectors, by DakimakuraStore.Explore more guides →